TNE technology High Speed Motor / Inverter
High Speed Permanent Magnet Synchronous Motor
High-sped PMSM
- Permanent magnet synchronous motor: Permanent magnet synchronous motor (PMSM)
- Speed: 10,000 to 200,000 RPM
- Motor output: 2kW to 300kW
- Motor stator: Distributed winding, Concentrated winding
Saturation Magnetization
BACK EMF V
Air-cooled permanent magnet synchronous motor
Water Cooled
| Frame | M0 | MA | MB | MC |
|---|---|---|---|---|
| kW | 8 | 11 | 15 | 23 |
| Max RPM | 98,000 | 82,000 | 110,000 | 110,000 |
Air Cooled
| Frame | MF | MG | MX | MY | M0 |
|---|---|---|---|---|---|
| kW | 0.1 | 0.2 | 3 | 5 | 8 |
| Max RPM | 200,000 | 180,000 | 75,000 | 43,000 | 86,000 |
Air Cooled
| Frame | M1 | M2 | M3 | M4 | M5 | M6 | M7 |
|---|---|---|---|---|---|---|---|
| kW | 18 | 37 | 75 | 115 | 150 | 230 | 300 |
| Max RPM | 86,000 | 60,000 | 42,000 | 34,000 | 30,000 | 24,500 | 21,000 |
Rotor integrated permanent magnet Applied.
- The selective combination with the air-end module considering installation environmental conditions such as outdoor temperature and pressure provides optimal cost-effectiveness.
- A wide range of speeds without deteriorating motor performance compared to induction motors.
Characteristics by motor type
High speed motor speed control.
High-sped Motor Speed Control
- A wide range of flow and pressure can be adjusted by applying a high-speed motor inverter.
- Independent inverter module design enables rapid problem solving and maintenance.
- The verified closed loop vector control enables stable operation under various field conditions.
- In the case of small high-speed motors (MF, MG), economic feasibility and convenience are provided by providing a motor-integrated inverter.
- Applicable to various OTS products (M0 to M7)
| 3kW | 5kW | 11kW | |
|---|---|---|---|
| Control method | Sensorless Vector Control | ||
| Maximum speed | 75,000 | 43,000 | 100,000 |
| Switching frequency | ~ 20kHz | ||
| Cooling method | Air Cooled | Air Cooled | Water Cooled |
| Input power | 250~450Vdc 단상 220Vac |
250~450Vdc 단상 220Vac |
450~750Vdc |
| Communication specification | Modbus RTU DIO/AIO |
CAN 2.0B DIO/AIO |
CAN 2.0B |
Turbo Machine Control
Turbo Machine Control
- Equipment can be monitored by providing various information such as pressure, flow rate, speed, power, temperature, and pressure.
- Various control mode options provided – speed control, pressure control, flow control, DO control, power control
- 7-inch or 10-inch touch screen
- Provides compatibility with on-site systems by providing various types of communication options
- – Modbus RTU, Modbus TCP, Profinet, Profibus etc
- – Digital Input/Output, Analog Input/Output
